DR. SHIELA HAFFAR M.D.
NPI 1720010507
Internal Medicine - Medical Oncology in Mesquite, TX

Dexamethasone sodium phosphate is a medication given via injection. It is a type of steroid that helps reduce inflammation and immune responses. It can be used to treat a variety of conditions, such as allergies, skin conditions, arthritis, and more.

Granisetron hydrochloride is an anti-nausea medication given by injection. It helps prevent nausea and vomiting often caused by cancer treatments like chemotherapy. Its dosage is measured in micrograms (mcg).

Palonosetron HCL is an injection used to prevent nausea and vomiting caused by chemotherapy. It works by blocking a natural substance (serotonin) in the body that can cause vomiting. This helps improve your comfort during cancer treatment.

A comprehensive group of blood chemicals test, also known as a comprehensive metabolic panel, is a blood test that measures your sugar level, electrolyte and fluid balance, kidney function, and liver function. This helps to check your body's overall health.

This is a routine visit for patients who have already been seen by the healthcare provider. During this approximately 20-29 minute appointment, your health status will be evaluated and any necessary treatments or tests will be discussed. It's a chance to address any health concerns you may have.

Intensity-modulated radiation therapy (IMRT) is a type of cancer treatment. It uses advanced technology to manipulate photon beams of radiation to conform to the shape of a tumor. IMRT allows for the radiation dose to conform more precisely to the three-dimensional shape of the tumor by modulating—or controlling—the intensity of the radiation beam. This can result in better tumor control and less harm to healthy tissue.

This is a routine check-up for patients who have previously visited our clinic. It involves a comprehensive review of your health and any ongoing treatments. The consultation lasts between 30-39 minutes, allowing enough time to discuss any concerns.

Chemotherapy is a treatment that uses drugs to destroy cancer cells. When administered into a vein, it's often through an IV. This procedure usually lasts 1 hour or less. You may feel a slight pinch as the needle is inserted, but it's generally painless.

This procedure involves introducing a new medication or substance into your bloodstream via a vein. It's typically done using a small needle. The substance can help treat various conditions or assist in diagnostic procedures. It's generally safe and monitored by professionals.

Radiation therapy involves directing high-energy particles to destroy cancer cells. The technique targets 3 or more areas, using custom blocks for precise focus. Tangential ports, wedges, and rotational beams adjust the radiation's path, while compensators balance radiation dose. Electron beam therapy with 6-10 mev energy is used for deep-seated tumors.

An iron level test measures the amount of iron in your blood. Iron is crucial for producing hemoglobin, a protein in red blood cells that carries oxygen throughout your body. This test helps identify iron deficiencies or excesses, which can lead to conditions like anemia or hemochromatosis.

Iron binding capacity is a blood test that measures how well your body can bind and transport iron. This helps your healthcare provider assess if your body has too little or too much iron, which can indicate certain health conditions.

This is a routine check-up for patients who have previously seen the doctor. During this 10-19 minute visit, the doctor will review your health status, discuss any concerns, and manage ongoing treatments or medications. It's a chance to ensure your health is on track.

A Ferritin level test measures the amount of ferritin, a protein that stores iron, in your blood. It helps determine how much iron your body is storing. If levels are low, it may indicate iron deficiency, while high levels could signify conditions like iron overload.

Reticulated (young) platelet measurement is a blood test that helps determine the number of new platelets your body is producing. It's useful for diagnosing and monitoring conditions affecting platelet production, like anemia or chemotherapy effects.

Gammaglobulin measurement is a blood test that checks the levels of certain proteins (gammaglobulins) that the body uses to fight infections. High or low levels can indicate various health conditions. It's a simple, quick procedure with minimal discomfort.

This procedure involves injecting fluids or medication directly into your vein. It's used for treatment, prevention, or diagnosis. An additional sequential infusion may be given within an hour if needed. This helps to ensure the medicine is distributed effectively in your body.

This procedure involves using high-energy radiation to target and treat disease. It covers 3 or more distinct areas, using custom blocks to protect healthy tissue. Tangential ports, wedges, and rotational beams help direct the radiation. An electron beam of 11-19 million electron volts (mev) is used for deep-seated conditions.

This procedure involves administering medication directly under the skin or into a muscle. A small needle is used to inject the drug, allowing it to be absorbed quickly into the bloodstream. It's a common method for delivering a variety of medications.

This is a lab test where a small sample of your blood is studied under a microscope. The goal is to count the number of white blood cells, which are crucial for your body's immune response. The count can help identify potential health issues.

A complete blood cell count (CBC) is an automated test that measures different components of the blood, including red cells, white cells, and platelets. It helps assess overall health, detect disorders like anemia or infection, and monitor medical treatments.

Diphenhydramine HCL injection is a medicine given to alleviate symptoms of allergies, colds, or hay fever. It can also help with motion sickness and certain symptoms of Parkinson's disease. Up to 50 mg may be administered depending on your condition.

This is a procedure where a medical professional inserts a small tube into your vein to deliver medication, nutrients, or fluids directly into your bloodstream. This can be for treatment, prevention, or diagnosis. The process typically takes less than an hour.

A Lactate Dehydrogenase level test measures the amount of this enzyme in your body. It's often done when tissue damage is suspected, as high levels can indicate issues like heart disease, lung disease, liver disease, or blood disorders. This test helps in diagnosing and monitoring these conditions.

This procedure involves introducing a new drug or substance into your vein, typically via an IV drip. It lasts for an hour or less. This method allows the substance to quickly reach your bloodstream, ensuring rapid and effective treatment.

Measurement of immunoglobulin light chains is a blood test that helps to detect and monitor certain disorders related to your immune system. It measures the levels of specific proteins, known as light chains, produced by your immune cells.

Chemotherapy is a treatment method that uses drugs to destroy cancer cells. The drugs are administered into a vein, usually in the arm. Each additional hour of chemotherapy allows for more of the medication to enter your bloodstream to fight against the cancer cells.

This service involves an initial office or outpatient visit for a new patient. The healthcare professional will spend 30-44 minutes understanding your health history, current issues, and discussing possible treatment plans. It's a comprehensive evaluation to start your healthcare journey.

A nuclear medicine study from skull base to mid-thigh with a CT scan involves using a small amount of radioactive material and CT imaging to examine body tissues and organs. This helps detect any abnormalities by providing detailed images of the body's internal structure.

Fluorodeoxyglucose F-18 FDG is a radioactive drug used in PET scans. It helps doctors see how your tissues and organs are functioning. The drug is given in a specific dose, up to 45 millicuries, depending on your body size and the type of scan.

This procedure involves delivering medication, fluids, or nutrients directly into your vein. This is done to treat, prevent, or diagnose various conditions. Each additional hour refers to the extended time you may need to receive these substances for optimal results.

The Beta-2 microglobulin level test measures the amount of this protein in your blood. It's often used to check kidney function or monitor certain cancers. High levels may indicate a health issue. The test involves a simple blood draw.

An infusion of normal saline solution, 1000 cc, is a common medical procedure. It involves introducing a saltwater solution into your bloodstream via an intravenous (IV) line. This helps to hydrate your body, correct electrolyte imbalances, and deliver medications if needed.

A Cyanocobalamin (Vitamin B-12) level test is a blood test that checks the amount of Vitamin B-12 in your body. This vitamin is vital for nerve function and the creation of red blood cells. Low or high levels could indicate a potential health issue.

This is a first-time office or outpatient visit lasting between 45-59 minutes. The healthcare provider evaluates your health, discusses your medical history, and may suggest further tests or treatments. It's an opportunity to ask questions and understand your health better.

Drawing blood is a simple procedure where a needle is inserted into a vein, usually in your arm, to collect a small sample. This sample helps in diagnosing any medical issues you may have. You might feel a small prick, but overall, it's a quick and safe process.

This procedure involves delivering fluids directly into your vein to keep your body hydrated. It is typically done when oral hydration is insufficient. Each additional hour means more fluid is infused to ensure adequate hydration.

Irrigation of an implanted venous access drug delivery device is a procedure to clean or unblock the device. This device is implanted under your skin to allow easy, frequent, and long-term access to your veins for medication delivery. The process involves flushing the device with a sterile solution to ensure it works properly.

This procedure involves introducing a medication or substance directly into your vein using a syringe. It's a quick and efficient way to deliver treatment throughout your body. You might feel a small prick when the needle enters. It's generally safe and effective.

This is a procedure where a small dose of Vitamin B-12, also known as Cyanocobalamin, is injected into your body. This vitamin is essential for nerve function and the production of red blood cells. It's often used to treat vitamin B-12 deficiency.

This is a first-time patient visit where a healthcare professional spends 60-74 minutes with you. It involves a comprehensive evaluation, including your medical history and current health condition. They'll also advise on preventive health measures and formulate a treatment plan if needed.

This service involves a follow-up appointment for existing patients, lasting between 40 to 54 minutes. During this time, your healthcare provider will assess your current health status, discuss any changes or concerns, review your treatment plan, and answer any questions you may have.