TIMOTHY E ROWLAND MD
NPI 1629197314
Family Medicine in Hilliard, OH

A lipid panel is a blood test that measures fats and fatty substances, such as cholesterol and triglycerides. These substances are used by your body as a source of energy. High levels can lead to health issues, including heart disease.

Hemoglobin A1c (HbA1c) is a test that measures your average blood sugar level over the past 2-3 months. It's used to monitor how well diabetes is being controlled. High levels may indicate that your diabetes treatment plan needs adjustment.

This is a routine visit for patients who have already been seen by the healthcare provider. During this approximately 20-29 minute appointment, your health status will be evaluated and any necessary treatments or tests will be discussed. It's a chance to address any health concerns you may have.

A Vitamin D-3 level test measures the amount of Vitamin D-3, a crucial nutrient, in your body. This test helps identify if your levels are too low or too high. Low levels may lead to bone weakness, while high levels could harm your kidneys. It's a simple blood test.

A TSH blood test measures the level of thyroid stimulating hormone in your body. This hormone is produced by the pituitary gland and regulates how your thyroid works. It's a simple procedure where a small amount of blood is drawn from your arm for analysis.

The Influenza Vaccine Split Virus, preservative-free, is a flu shot to protect against the influenza virus. It is made from parts of inactivated flu viruses and doesn't contain preservatives, reducing potential side effects. It helps your body develop immunity to the flu.

The administration of the influenza virus vaccine, also known as the flu shot, is a simple procedure to protect against the flu. A healthcare provider injects a small dose of the vaccine into your arm. This stimulates your immune system to produce antibodies, which will help your body fight off the flu if exposed.

Triamcinolone acetonide is a medication used to reduce inflammation in the body. It's given as a 10 mg injection for conditions like allergies, arthritis, or skin problems. The injection helps to decrease swelling, redness, and itching.

Prostate cancer screening involves a simple blood test known as the Prostate Specific Antigen (PSA) test. This test measures the level of PSA in your blood. Higher than normal levels can be an early indication of prostate issues, including cancer. It's a key tool in early detection.

A basic group blood test measures the levels of certain chemicals in your blood, including calcium. This helps assess your overall health and detect potential problems. The procedure involves drawing a small amount of blood from your arm, which is then analyzed in a lab.

The LDL cholesterol level is a test that measures the amount of low-density lipoprotein (LDL) in your blood. LDL is often referred to as 'bad cholesterol' because high levels can lead to heart disease. Regular testing helps monitor and manage your heart health.

A Ferritin level test measures the amount of ferritin, a protein that stores iron, in your blood. It helps determine how much iron your body is storing. If levels are low, it may indicate iron deficiency, while high levels could signify conditions like iron overload.

A Cyanocobalamin (Vitamin B-12) level test is a blood test that checks the amount of Vitamin B-12 in your body. This vitamin is vital for nerve function and the creation of red blood cells. Low or high levels could indicate a potential health issue.

A manual urinalysis test with automated microscopic examination is a lab process that checks your urine for health indicators. It involves a machine scanning your sample to identify any abnormal elements, which can assist in diagnosing various conditions.

A bacterial urine culture is a laboratory test that checks for bacteria in your urine. It helps identify the type of bacteria causing an infection, enabling the selection of the most effective treatment. The test involves collecting a urine sample in a sterile container.

An electrocardiogram (ECG) is a non-invasive test that records your heart's electrical activity. Using 12 leads attached to your body, it captures data to help identify heart conditions. A doctor interprets the results and provides a report.

A clotting time blood test helps determine how quickly your blood forms clots, a process crucial to stop bleeding. During the test, a small blood sample is taken from your arm. The sample is then analyzed in a lab to see how long it takes for a clot to form.

Triglycerides level refers to the amount of a specific type of fat in your blood. High levels can increase the risk of heart disease. A simple blood test, usually done after fasting, measures this. Healthy lifestyle choices help maintain optimal levels.

A creatinine level test measures the amount of creatinine in your blood. This substance is a waste product from normal muscle use. Higher levels can indicate possible kidney dysfunction or muscle injury. This test helps monitor kidney health.

The urine microalbumin level test measures the amount of a protein called albumin in your urine. This test helps to detect early signs of kidney damage. High levels of albumin may suggest your kidneys aren't functioning properly. It's a simple, non-invasive test that involves providing a urine sample.

A Folic Acid Level, Serum test measures the amount of folic acid, a type of B vitamin, in your blood. This vitamin is important for cell growth and development. It's crucial for your body to function well. If your levels are low, it may indicate a deficiency, which can lead to health issues.

PSA measurement is a simple blood test that checks for a specific protein produced by your body. High levels could indicate a health issue that needs further investigation. It's often used to monitor general wellness and is part of routine health screening.

A DXA bone density measurement is a simple, quick, and non-invasive procedure that assesses the strength of your bones. This test uses X-rays to measure the amount of minerals, mainly calcium, in the hip, pelvis, and spine. It helps in early detection of osteoporosis or other bone diseases.

The Thyroxine (thyroid chemical), free test is a blood test that measures the level of free T4 in your body. T4 is a hormone produced by your thyroid gland and is essential for growth and metabolism. If your T4 levels are too high or too low, it could indicate a thyroid disorder.

This process checks how well certain drugs, like antibiotics, can fight against infections. It involves mixing the drug with a microbe (like bacteria or a virus) in a lab. By observing how the microbe reacts, it helps determine the best drug to treat your infection.

The pneumococcal vaccine helps protect against pneumococcal bacteria, which can cause severe infections like pneumonia and meningitis. The vaccine is given as an injection, typically in the arm. It's recommended for infants, older adults, and those with certain health conditions.

A bacterial culture for aerobic isolates is a lab test that helps identify bacteria that thrive in oxygen-rich environments. A sample from the suspected infection site is collected, then placed in a special medium that promotes bacterial growth. After a set period, the lab identifies any bacteria present, aiding in accurate diagnosis and treatment.

An iron level test measures the amount of iron in your blood. Iron is crucial for producing hemoglobin, a protein in red blood cells that carries oxygen throughout your body. This test helps identify iron deficiencies or excesses, which can lead to conditions like anemia or hemochromatosis.

Iron binding capacity is a blood test that measures how well your body can bind and transport iron. This helps your healthcare provider assess if your body has too little or too much iron, which can indicate certain health conditions.

A magnesium level test is a simple blood test that measures the amount of magnesium in your body. Magnesium is a crucial mineral that helps your nerves, muscles, and heart function properly. The test can help detect health conditions like kidney disease or malnutrition.

This procedure involves using a needle to remove (aspiration) or introduce (injection) fluid into a large joint like the knee or hip. It can help diagnose conditions, relieve discomfort, or deliver medication directly to the joint.

A urinalysis is a simple, non-invasive test that checks the urine for various elements such as sugar, protein, and signs of infection. It can help detect many common conditions, including kidney disease and diabetes. The manual test involves a lab technician examining a urine sample.

The 23-valent pneumococcal vaccine is an injection that helps protect against serious infections caused by 23 types of pneumococcal bacteria. It's vital for those at risk, like older adults or people with certain health conditions, to prevent pneumonia, meningitis, and bloodstream infections.

This service involves a follow-up appointment for existing patients, lasting between 40 to 54 minutes. During this time, your healthcare provider will assess your current health status, discuss any changes or concerns, review your treatment plan, and answer any questions you may have.

An X-ray of the knee, 4 or more views, is a non-invasive imaging test. It involves capturing multiple images of your knee from different angles. This helps in diagnosing conditions such as fractures, arthritis, or infections. The procedure is quick and painless.

A kidney function blood test panel checks how well your kidneys are working. It measures levels of various substances in your blood, including proteins, electrolytes, and waste products. The results can help detect potential kidney issues early.

This is a service where a doctor or authorized practitioner certifies that you require Medicare-covered home health services. They will communicate with the home health agency and review reports on your health status to ensure you receive appropriate care. This does not involve an in-person visit.

A chest X-ray, 2 views, is a quick, painless test that creates pictures of the structures inside your chest, such as your heart, lungs, and blood vessels. Two different angles are used to get a comprehensive view. This helps in diagnosing conditions like pneumonia, heart problems, or lung cancer.

Transitional care management services focus on coordinating and managing your care after you leave the hospital. For moderate complexity problems, this involves managing your medications, arranging further treatments, and ensuring you have the necessary follow-ups.

The Red Blood Cell Sedimentation Rate is a test that helps detect inflammation in the body. It's automated, meaning a machine does the work. This test measures how fast red blood cells settle at the bottom of a tube in an hour. A faster rate may indicate inflammation.