TRI CAO LE M.D.
NPI 1609286756
Internal Medicine - Hematology & Oncology in Bedford, TX

A comprehensive group of blood chemicals test, also known as a comprehensive metabolic panel, is a blood test that measures your sugar level, electrolyte and fluid balance, kidney function, and liver function. This helps to check your body's overall health.

This procedure involves inserting a small needle into a vein, typically in your arm, to collect a blood sample. It's a quick and simple process to help diagnose or monitor health conditions. You may feel a small prick, but discomfort is minimal.

Granisetron hydrochloride is an anti-nausea medication given by injection. It helps prevent nausea and vomiting often caused by cancer treatments like chemotherapy. Its dosage is measured in micrograms (mcg).

This is a routine check-up for patients who have previously visited our clinic. It involves a comprehensive review of your health and any ongoing treatments. The consultation lasts between 30-39 minutes, allowing enough time to discuss any concerns.

Palonosetron HCL is an injection used to prevent nausea and vomiting caused by chemotherapy. It works by blocking a natural substance (serotonin) in the body that can cause vomiting. This helps improve your comfort during cancer treatment.

A Ferritin level test measures the amount of ferritin, a protein that stores iron, in your blood. It helps determine how much iron your body is storing. If levels are low, it may indicate iron deficiency, while high levels could signify conditions like iron overload.

An iron level test measures the amount of iron in your blood. Iron is crucial for producing hemoglobin, a protein in red blood cells that carries oxygen throughout your body. This test helps identify iron deficiencies or excesses, which can lead to conditions like anemia or hemochromatosis.

Iron binding capacity is a blood test that measures how well your body can bind and transport iron. This helps your healthcare provider assess if your body has too little or too much iron, which can indicate certain health conditions.

A Lactate Dehydrogenase level test measures the amount of this enzyme in your body. It's often done when tissue damage is suspected, as high levels can indicate issues like heart disease, lung disease, liver disease, or blood disorders. This test helps in diagnosing and monitoring these conditions.

Gammaglobulin measurement is a blood test that checks the levels of certain proteins (gammaglobulins) that the body uses to fight infections. High or low levels can indicate various health conditions. It's a simple, quick procedure with minimal discomfort.

Chemotherapy is a treatment that uses drugs to destroy cancer cells. When administered into a vein, it's often through an IV. This procedure usually lasts 1 hour or less. You may feel a slight pinch as the needle is inserted, but it's generally painless.

This service involves a follow-up appointment for existing patients, lasting between 40 to 54 minutes. During this time, your healthcare provider will assess your current health status, discuss any changes or concerns, review your treatment plan, and answer any questions you may have.

This is a routine visit for patients who have already been seen by the healthcare provider. During this approximately 20-29 minute appointment, your health status will be evaluated and any necessary treatments or tests will be discussed. It's a chance to address any health concerns you may have.

Measurement of immunoglobulin light chains is a blood test that helps to detect and monitor certain disorders related to your immune system. It measures the levels of specific proteins, known as light chains, produced by your immune cells.

This procedure involves injecting fluids or medication directly into your vein. It's used for treatment, prevention, or diagnosis. An additional sequential infusion may be given within an hour if needed. This helps to ensure the medicine is distributed effectively in your body.

This procedure involves administering medication directly under the skin or into a muscle. A small needle is used to inject the drug, allowing it to be absorbed quickly into the bloodstream. It's a common method for delivering a variety of medications.

A magnesium level test is a simple blood test that measures the amount of magnesium in your body. Magnesium is a crucial mineral that helps your nerves, muscles, and heart function properly. The test can help detect health conditions like kidney disease or malnutrition.

A TSH blood test measures the level of thyroid stimulating hormone in your body. This hormone is produced by the pituitary gland and regulates how your thyroid works. It's a simple procedure where a small amount of blood is drawn from your arm for analysis.

This procedure involves introducing a new medication or substance into your bloodstream via a vein. It's typically done using a small needle. The substance can help treat various conditions or assist in diagnostic procedures. It's generally safe and monitored by professionals.

Intensity-modulated radiation therapy (IMRT) is a type of cancer treatment. It uses advanced technology to manipulate photon beams of radiation to conform to the shape of a tumor. IMRT allows for the radiation dose to conform more precisely to the three-dimensional shape of the tumor by modulating—or controlling—the intensity of the radiation beam. This can result in better tumor control and less harm to healthy tissue.

Zoledronic acid is a medication given via injection to strengthen bones. It's often used in patients with osteoporosis or certain types of cancer. The injection helps reduce the risk of fractures and other bone complications.

Reticulated (young) platelet measurement is a blood test that helps determine the number of new platelets your body is producing. It's useful for diagnosing and monitoring conditions affecting platelet production, like anemia or chemotherapy effects.

This is a procedure where a medical professional inserts a small tube into your vein to deliver medication, nutrients, or fluids directly into your bloodstream. This can be for treatment, prevention, or diagnosis. The process typically takes less than an hour.

A basic group blood test measures the levels of certain chemicals in your blood, including calcium. This helps assess your overall health and detect potential problems. The procedure involves drawing a small amount of blood from your arm, which is then analyzed in a lab.

A phosphate level test measures the amount of phosphate in your blood. Phosphate is a chemical that contains the mineral phosphorus, crucial for energy production, muscle and nerve function, and bone growth. Imbalances may indicate kidney disease or other health issues.

Chemotherapy is a treatment method that uses drugs to destroy cancer cells. The drugs are administered into a vein, usually in the arm. Each additional hour of chemotherapy allows for more of the medication to enter your bloodstream to fight against the cancer cells.

Diphenhydramine HCL injection is a medicine given to alleviate symptoms of allergies, colds, or hay fever. It can also help with motion sickness and certain symptoms of Parkinson's disease. Up to 50 mg may be administered depending on your condition.

This procedure involves the injection of hormone-based anti-cancer drugs under the skin or into a muscle. These medications help to slow down or stop the growth of certain types of cancer cells. The process is usually quick and can be performed in a clinic or hospital.

Carcinoembryonic Antigen (CEA) protein level is a blood test often used in cancer care. It measures the amount of CEA protein in your blood, which can increase in cases of certain types of cancer. It's used to monitor treatment progress and check for cancer recurrence.

An automated red blood cell count is a laboratory test that counts the number of red blood cells in your blood. This test also includes additional calculations to measure the size, volume, and hemoglobin concentration of these cells. It helps to identify any abnormalities in your blood.

This procedure involves introducing a new drug or substance into your vein, typically via an IV drip. It lasts for an hour or less. This method allows the substance to quickly reach your bloodstream, ensuring rapid and effective treatment.

This is a lab test where a small sample of your blood is studied under a microscope. The goal is to count the number of white blood cells, which are crucial for your body's immune response. The count can help identify potential health issues.

A complete blood cell count (CBC) is an automated test that measures different components of the blood, including red cells, white cells, and platelets. It helps assess overall health, detect disorders like anemia or infection, and monitor medical treatments.

Irrigation of an implanted venous access drug delivery device is a procedure to clean or unblock the device. This device is implanted under your skin to allow easy, frequent, and long-term access to your veins for medication delivery. The process involves flushing the device with a sterile solution to ensure it works properly.

An infusion of normal saline solution, 1000 cc, is a common medical procedure. It involves introducing a saltwater solution into your bloodstream via an intravenous (IV) line. This helps to hydrate your body, correct electrolyte imbalances, and deliver medications if needed.

Fluorodeoxyglucose F-18 FDG is a radioactive drug used in PET scans. It helps doctors see how your tissues and organs are functioning. The drug is given in a specific dose, up to 45 millicuries, depending on your body size and the type of scan.

A CT scan of the chest with contrast is an imaging procedure. A special dye (contrast) is used to highlight specific areas in your body, providing clearer pictures of your chest. This helps in diagnosing conditions related to your lungs, heart, and other chest structures.

This is a first-time office or outpatient visit lasting between 45-59 minutes. The healthcare provider evaluates your health, discusses your medical history, and may suggest further tests or treatments. It's an opportunity to ask questions and understand your health better.

Follow-up hospital inpatient care is a daily service where a healthcare professional checks on your health progress during your hospital stay. Each session typically lasts 15 minutes, involving updates on your condition and adjustments to your treatment plan, if necessary.

A CT scan of the abdomen and pelvis with contrast is an imaging procedure. A special dye, called contrast, is used to make certain areas more visible. This can help identify issues such as infections, tumors, or other abnormalities. The procedure is painless and usually takes about 30 minutes.

This is a first-time patient visit where a healthcare professional spends 60-74 minutes with you. It involves a comprehensive evaluation, including your medical history and current health condition. They'll also advise on preventive health measures and formulate a treatment plan if needed.

Unclassified drugs are medications that don't fit into an existing category or class due to their unique properties or uses. They may be used for various conditions and their effects may differ widely. Always ask your healthcare provider for more information about these drugs.

A nuclear medicine study from skull base to mid-thigh with a CT scan involves using a small amount of radioactive material and CT imaging to examine body tissues and organs. This helps detect any abnormalities by providing detailed images of the body's internal structure.

The Haptoglobin level test measures the amount of haptoglobin, a protein made by the liver, in your blood. This test is often used to check for conditions that cause the breakdown of red blood cells. Lower levels may indicate hemolytic anemia, while higher levels can suggest inflammation.

Initial hospital inpatient care is a service where a healthcare provider spends about 50 minutes per day overseeing your care while you're admitted in the hospital. This includes reviewing your health status, planning your treatment, and ensuring your safety and comfort.

This is a combined medication injection used to prevent nausea and vomiting often associated with chemotherapy. Fosnetupitant blocks substance P/neurokinin 1, reducing the urge to vomit. Palonosetron prevents a chemical action in the brain that may cause nausea and vomiting.

Follow-up hospital inpatient care involves daily check-ups while you're admitted in the hospital. Typically, a healthcare provider spends about 25 minutes each day reviewing your condition, adjusting treatment if needed, and answering any questions you might have.

This is a procedure where a sterile solution is administered into your vein to help restore body fluid balance. It typically lasts between 31-60 minutes. It's a safe, common treatment for dehydration or to deliver medication.

Drawing blood is a simple procedure where a needle is inserted into a vein, usually in your arm, to collect a small sample. This sample helps in diagnosing any medical issues you may have. You might feel a small prick, but overall, it's a quick and safe process.

The Beta-2 microglobulin level test measures the amount of this protein in your blood. It's often used to check kidney function or monitor certain cancers. High levels may indicate a health issue. The test involves a simple blood draw.