SCRIPPS CLINIC MEDICAL LABORATORIES
NPI 1578549044
Clinical Medical Laboratory in San Diego, CA

Areas of Expertise

The following services and procedures, recently provided to Medicare patients, illustrate the range of care this provider offers. This list reflects the variety of services available to all patients visiting the practice and is based on 2022 Medicare dataset. In general, the more frequently a provider treats specific conditions or performs particular procedures, the more experienced they become in addressing similar patient needs. The provider has delivered many of the services listed below to Medicare patients. Please note that this list does not include services provided to patients who are not covered by Medicare.

2019-ncov coronavirus, sars-cov-2/2019-ncov (covid-19), any technique, multiple types or subtypes (includes all targets), non-cdc

This refers to a test for COVID-19, caused by the SARS-CoV-2 virus. The test identifies multiple types or subtypes of the virus, including all targets. It's not specifically based on the CDC's testing protocol. It helps determine if you're currently infected with the virus.

This service was performed 551 times for 522 patients

Albumin (protein) level

The Albumin Level test measures the amount of albumin, a vital protein made by the liver, in your blood. This protein helps keep fluid in your bloodstream so it doesn't leak into other tissues. It's also vital for tissue growth and healing. Low or high levels can indicate certain health issues.

This service was performed 19 times for 19 patients

Automated urinalysis test

An automated urinalysis test is a routine examination that checks your urine for various substances. It can help identify potential health issues such as kidney problems or diabetes. The test uses a machine to analyze a small urine sample, providing quick and accurate results.

This service was performed 153 times for 108 patients

Bilirubin level, direct

A direct bilirubin test measures a form of bilirubin in your blood. Bilirubin is a substance produced during the normal breakdown of red blood cells. High levels may indicate liver or blood disorders. This test helps diagnose and monitor these conditions.

This service was performed 62 times for 47 patients

Bilirubin level, total

A total bilirubin level test is a blood test that helps check how well your liver is functioning. It measures bilirubin, a yellow substance your body creates when it breaks down red blood cells. High levels may indicate a problem with your liver or bile duct.

This service was performed 14 times for 14 patients

Blood creatinine level

A blood creatinine level test measures the amount of creatinine in your blood. Creatinine is a waste product that your body produces when it uses energy. High levels may indicate that your kidneys aren't working properly. This test is often used to monitor kidney health.

This service was performed 23 times for 23 patients

Blood test, basic group of blood chemicals (calcium, total)

A basic group blood test measures the levels of certain chemicals in your blood, including calcium. This helps assess your overall health and detect potential problems. The procedure involves drawing a small amount of blood from your arm, which is then analyzed in a lab.

This service was performed 738 times for 644 patients

Blood test, clotting time

A clotting time blood test helps determine how quickly your blood forms clots, a process crucial to stop bleeding. During the test, a small blood sample is taken from your arm. The sample is then analyzed in a lab to see how long it takes for a clot to form.

This service was performed 1,453 times for 477 patients

Blood test, comprehensive group of blood chemicals

A comprehensive group of blood chemicals test, also known as a comprehensive metabolic panel, is a blood test that measures your sugar level, electrolyte and fluid balance, kidney function, and liver function. This helps to check your body's overall health.

This service was performed 3,589 times for 1,686 patients

Calcium level, total

A total calcium level test measures the amount of calcium in your blood. Calcium is essential for body functions like bone formation, nerve signal transmission, and muscle contraction. Abnormal levels may indicate conditions like bone disease or kidney disorders.

This service was performed 24 times for 23 patients

Coagulation assessment blood test, plasma or whole blood

A coagulation assessment blood test evaluates how well your blood clots, helping identify potential bleeding or clotting disorders. This test uses a sample of your plasma or whole blood. It's a standard procedure to ensure your body's clotting process is functioning properly.

This service was performed 187 times for 180 patients

Coagulation function measurement, d-dimer; quantitative

A quantitative D-dimer test measures the amount of D-dimer, a protein fragment, in your blood. This test helps detect abnormal blood clotting. D-dimer levels can rise in conditions where clots are forming and breaking down, such as deep vein thrombosis or pulmonary embolism.

This service was performed 167 times for 154 patients

Complete blood cell count (red cells, white blood cell, platelets), automated test

A complete blood cell count (CBC) is an automated test that measures different components of the blood, including red cells, white cells, and platelets. It helps assess overall health, detect disorders like anemia or infection, and monitor medical treatments.

This service was performed 317 times for 296 patients

Complete blood cell count (red cells, white blood cell, platelets), automated test and automated differential white blood cell count

A Complete Blood Cell Count is a common test that measures various components of the blood, including red cells (carry oxygen), white cells (fight infection), and platelets (help blood clot). An automated test ensures accuracy. The differential count provides detailed information about white cell types.

This service was performed 6,633 times for 3,786 patients

Creatine kinase (cardiac enzyme) level, total

The total Creatine Kinase (CK) level test is a blood test that helps assess the health of your heart. It measures an enzyme called CK that's released into the bloodstream when heart or other muscle tissue is damaged. High levels may indicate a heart attack or muscle disorder.

This service was performed 359 times for 288 patients

Detection test by multiplex amplified probe technique for severe acute respiratory syndrome coronavirus 2 (sars-cov-2) (covid-19) and influenza virus types a and b

This test detects the presence of SARS-CoV-2 (COVID-19) and Influenza types A and B in your body. It uses a method called the multiplex amplified probe technique to amplify and identify specific virus genes. It helps in early diagnosis and appropriate treatment.

This service was performed 208 times for 204 patients

Detection test by nucleic acid for multiple types influenza virus

A detection test by nucleic acid for multiple types of influenza virus is a diagnostic procedure. It identifies the genetic material of the virus in your body. It's highly accurate and can distinguish between different flu strains, helping in prompt and precise treatment.

This service was performed 112 times for 110 patients

Detection test by nucleic acid for strep (streptococcus, group a), amplified probe technique

This test detects Group A Streptococcus bacteria in your body. It uses an amplified probe technique, which amplifies the bacteria's nucleic acid, making it easier to identify. This test helps diagnose conditions like strep throat or scarlet fever.

This service was performed 76 times for 75 patients

Insertion of needle into vein for collection of blood sample

This procedure involves inserting a small needle into a vein, typically in your arm, to collect a blood sample. It's a quick and simple process to help diagnose or monitor health conditions. You may feel a small prick, but discomfort is minimal.

This service was performed 17,538 times for 7,609 patients

Kidney function blood test panel

A kidney function blood test panel checks how well your kidneys are working. It measures levels of various substances in your blood, including proteins, electrolytes, and waste products. The results can help detect potential kidney issues early.

This service was performed 21 times for 18 patients

Lactate dehydrogenase (enzyme) level

A Lactate Dehydrogenase level test measures the amount of this enzyme in your body. It's often done when tissue damage is suspected, as high levels can indicate issues like heart disease, lung disease, liver disease, or blood disorders. This test helps in diagnosing and monitoring these conditions.

This service was performed 201 times for 104 patients

Lactic acid level

A lactic acid level test measures the amount of lactic acid in your blood. This substance is produced when oxygen levels in your body are low, typically during intense exercise. However, high levels could indicate a problem with your body's metabolism or a lack of oxygen.

This service was performed 210 times for 195 patients

Lipase (fat enzyme) level

A Lipase Level test measures the amount of lipase in your blood. Lipase is an enzyme that helps your body digest fats. High or low levels can indicate problems with your pancreas, such as pancreatitis or other conditions. This test helps your doctor diagnose and monitor these conditions.

This service was performed 485 times for 433 patients

Liver enzyme (sgpt), level

A liver enzyme (SGPT) level test is a blood test that checks the health of your liver. SGPT is an enzyme found in your liver cells. If your liver is damaged or inflamed, SGPT can leak into your bloodstream, raising the enzyme level. This test helps identify liver diseases early.

This service was performed 14 times for 14 patients

Liver function blood test panel

A liver function blood test panel helps check the health of your liver. It measures various proteins, liver enzymes, and bilirubin in your blood. If these levels are too high or too low, it could signal a liver problem. It's a simple, non-invasive test that involves drawing blood.

This service was performed 23 times for 18 patients

Magnesium level

A magnesium level test is a simple blood test that measures the amount of magnesium in your body. Magnesium is a crucial mineral that helps your nerves, muscles, and heart function properly. The test can help detect health conditions like kidney disease or malnutrition.

This service was performed 181 times for 115 patients

Manual urinalysis test with examination using microscope, automated

A manual urinalysis test with automated microscopic examination is a lab process that checks your urine for health indicators. It involves a machine scanning your sample to identify any abnormal elements, which can assist in diagnosing various conditions.

This service was performed 591 times for 497 patients

Microscopic examination for white blood cells with manual cell count

This is a lab test where a small sample of your blood is studied under a microscope. The goal is to count the number of white blood cells, which are crucial for your body's immune response. The count can help identify potential health issues.

This service was performed 51 times for 38 patients

Natriuretic peptide (heart and blood vessel protein) level

A natriuretic peptide level test is a blood test that helps doctors check for heart failure. It measures the amount of certain proteins that your heart and blood vessels produce when they are under stress. High levels may indicate heart disease.

This service was performed 298 times for 250 patients

Phosphatase (enzyme) level, alkaline

The Alkaline Phosphatase Level test measures the amount of alkaline phosphatase, an enzyme, in your blood. High or low levels can indicate a variety of health conditions, such as liver disease or bone disorders. It's a common test done to help diagnose and monitor these conditions.

This service was performed 11 times for 11 patients

Phosphate level

A phosphate level test measures the amount of phosphate in your blood. Phosphate is a chemical that contains the mineral phosphorus, crucial for energy production, muscle and nerve function, and bone growth. Imbalances may indicate kidney disease or other health issues.

This service was performed 188 times for 51 patients

Red blood cell sedimentation rate, to detect inflammation, automated

The Red Blood Cell Sedimentation Rate is a test that helps detect inflammation in the body. It's automated, meaning a machine does the work. This test measures how fast red blood cells settle at the bottom of a tube in an hour. A faster rate may indicate inflammation.

This service was performed 476 times for 383 patients

Red blood count automated, with additional calculations

An automated red blood cell count is a laboratory test that counts the number of red blood cells in your blood. This test also includes additional calculations to measure the size, volume, and hemoglobin concentration of these cells. It helps to identify any abnormalities in your blood.

This service was performed 37 times for 32 patients

Screening test for mononucleosis (mono)

A screening test for mononucleosis, often known as 'mono', is a simple blood test. It checks for antibodies that your body produces when fighting the Epstein-Barr virus, the common cause of mono. This test helps confirm if symptoms like fatigue, sore throat, and fever are due to mono.

This service was performed 16 times for 15 patients

Troponin (protein) analysis, quantitative

Troponin analysis is a blood test that checks for damage to the heart. Elevated levels of troponin, a protein in heart cells, can indicate a heart attack. This test helps in early detection and management of heart-related issues.

This service was performed 826 times for 707 patients

Urea nitrogen level to assess kidney function, quantitative

The urea nitrogen level test is a routine blood test that checks the amount of urea nitrogen in your blood to evaluate how well your kidneys are working. If the levels are higher than normal, it may indicate that your kidneys are not functioning properly.

This service was performed 23 times for 23 patients

White blood cell measure, stool specimen

A white blood cell measure in a stool specimen is a test that checks for inflammation or infection in your digestive tract. The stool is collected and examined in a lab, where the number of white blood cells is counted. This helps in diagnosing conditions like colitis or Crohn's disease.

This service was performed 25 times for 25 patients

CLIA Information

The Clinical Laboratory Improvement Amendments (CLIA) of 1988 applies to facilities or sites that test human specimens for health assessment or to diagnose, prevent, or treat disease. The CLIA Program sets standards for clinical laboratory testing and issues certificates. The NPI / CLIA crosswalk information for this NPI number is:

CLIA Number

05D2155744

Facility Type

Physician Office

Certificate Effective Date

October 03, 2024

Certificate Expiration Date

October 02, 2026

Laboratory Director

KEITH E. THOMPSON

Certificate Type

Certificate for Provider-Performed Microscopy Procedures (PPMP)

Certificate Type Description

This CLIA certificate is issued to Scripps Clinic Medical Laboratories in which a physician, midlevel practitioner or dentist that performs specific microscopy procedures during the course of a patient's visit. A limited list of provider-performed microscopy procedures is included under this certificate type, which are categorized as moderate complexity testing.

Reviews for SCRIPPS CLINIC MEDICAL LABORATORIES

There are currently no reviews for this provider. Be the first person to share your experience with this provider by filling out our review form. Your insights are appreciated and will help others make informed decisions.

Frequently Asked Questions