ABSOLUTE DIAGNOSTICS, LLC
NPI 1568059368
Clinical Medical Laboratory in Wichita, KS

Areas of Expertise

The following services and procedures, recently provided to Medicare patients, illustrate the range of care this provider offers. This list reflects the variety of services available to all patients visiting the practice and is based on 2022 Medicare dataset. In general, the more frequently a provider treats specific conditions or performs particular procedures, the more experienced they become in addressing similar patient needs. The provider has delivered many of the services listed below to Medicare patients. Please note that this list does not include services provided to patients who are not covered by Medicare.

Amplifed dna or rna probe detection of severe acute respiratory syndrome coronavirus 2 (covid-19) antigen

This is a lab test that detects the presence of COVID-19 in your body. It uses a technique to amplify the virus's genetic material, either DNA or RNA, making it easier to identify. A positive result indicates an active infection.

This service was performed 33 times for 32 patients

Automated urinalysis test

An automated urinalysis test is a routine examination that checks your urine for various substances. It can help identify potential health issues such as kidney problems or diabetes. The test uses a machine to analyze a small urine sample, providing quick and accurate results.

This service was performed 119 times for 97 patients

Blood test, basic group of blood chemicals (calcium, total)

A basic group blood test measures the levels of certain chemicals in your blood, including calcium. This helps assess your overall health and detect potential problems. The procedure involves drawing a small amount of blood from your arm, which is then analyzed in a lab.

This service was performed 260 times for 133 patients

Blood test, clotting time

A clotting time blood test helps determine how quickly your blood forms clots, a process crucial to stop bleeding. During the test, a small blood sample is taken from your arm. The sample is then analyzed in a lab to see how long it takes for a clot to form.

This service was performed 88 times for 22 patients

Blood test, comprehensive group of blood chemicals

A comprehensive group of blood chemicals test, also known as a comprehensive metabolic panel, is a blood test that measures your sugar level, electrolyte and fluid balance, kidney function, and liver function. This helps to check your body's overall health.

This service was performed 423 times for 289 patients

Blood test, lipids (cholesterol and triglycerides)

A lipid panel is a blood test that measures fats and fatty substances, such as cholesterol and triglycerides. These substances are used by your body as a source of energy. High levels can lead to health issues, including heart disease.

This service was performed 91 times for 86 patients

Blood test, thyroid stimulating hormone (tsh)

A TSH blood test measures the level of thyroid stimulating hormone in your body. This hormone is produced by the pituitary gland and regulates how your thyroid works. It's a simple procedure where a small amount of blood is drawn from your arm for analysis.

This service was performed 138 times for 117 patients

Complete blood cell count (red cells, white blood cell, platelets), automated test

A complete blood cell count (CBC) is an automated test that measures different components of the blood, including red cells, white cells, and platelets. It helps assess overall health, detect disorders like anemia or infection, and monitor medical treatments.

This service was performed 152 times for 99 patients

Complete blood cell count (red cells, white blood cell, platelets), automated test and automated differential white blood cell count

A Complete Blood Cell Count is a common test that measures various components of the blood, including red cells (carry oxygen), white cells (fight infection), and platelets (help blood clot). An automated test ensures accuracy. The differential count provides detailed information about white cell types.

This service was performed 421 times for 269 patients

Cyanocobalamin (vitamin b-12) level

A Cyanocobalamin (Vitamin B-12) level test is a blood test that checks the amount of Vitamin B-12 in your body. This vitamin is vital for nerve function and the creation of red blood cells. Low or high levels could indicate a potential health issue.

This service was performed 44 times for 40 patients

Detection of mycoplasma genitalium by dna or rna probe

This procedure involves the use of special probes to identify the presence of a specific bacteria, Mycoplasma Genitalium, in your body. These probes detect the bacteria's unique DNA or RNA, helping to confirm if you have an infection.

This service was performed 149 times for 124 patients

Detection test by nucleic acid for chlamydia pneumoniae, amplified probe technique

This test checks for the presence of Chlamydia pneumoniae, a bacterium that can cause respiratory infections. It uses an amplified probe technique, which magnifies the bacterium's genetic material for easier detection. It's a standard, non-invasive procedure.

This service was performed 88 times for 83 patients

Detection test by nucleic acid for legionella pneumophila (water borne bacteria), amplified probe technique

A detection test for Legionella Pneumophila, a waterborne bacteria, uses the amplified probe technique. This involves identifying the bacteria's unique genetic material (nucleic acid) and amplifying it for easier detection, aiding in accurate diagnosis.

This service was performed 12 times for 12 patients

Detection test by nucleic acid for multiple types of respiratory virus, multiple types or subtypes, 3-5 targets

This test identifies different respiratory viruses by examining their nucleic acid, the building blocks of their genetic material. It can detect multiple types or subtypes, specifically 3-5 targets. This helps in diagnosing your respiratory illness accurately.

This service was performed 41 times for 41 patients

Detection test by nucleic acid for mycoplasma pneumoniae (bacteria), amplified probe technique

This test checks for Mycoplasma pneumoniae, a bacteria that can cause lung infection. It uses a method called amplified probe technique, which identifies the bacteria's genetic material. This helps in diagnosing the infection accurately.

This service was performed 129 times for 122 patients

Detection test by nucleic acid for organism, amplified probe technique

A nucleic acid detection test is a procedure to identify specific organisms in your body. This test uses an amplified probe technique, which magnifies the genetic material of the organism, making it easier to detect. It's a precise way to diagnose infections.

This service was performed 3,880 times for 326 patients

Detection test by nucleic acid for staphylococcus aureus (bacteria), amplified probe technique

A detection test for Staphylococcus aureus uses a method called the amplified probe technique. This method identifies the bacteria's unique genetic material, or nucleic acid, helping to confirm its presence. It's a highly accurate way to detect this type of bacteria.

This service was performed 262 times for 220 patients

Detection test by nucleic acid for staphylococcus aureus, methicillin resistant (mrsa bacteria), amplified probe technique

A detection test by nucleic acid for MRSA bacteria uses an amplified probe technique. It's a lab procedure that identifies the presence of MRSA, a type of bacteria resistant to many antibiotics. This test helps in deciding the best treatment.

This service was performed 278 times for 223 patients

Detection test by nucleic acid for strep (streptococcus, group a), amplified probe technique

This test detects Group A Streptococcus bacteria in your body. It uses an amplified probe technique, which amplifies the bacteria's nucleic acid, making it easier to identify. This test helps diagnose conditions like strep throat or scarlet fever.

This service was performed 330 times for 276 patients

Detection test by nucleic acid for strep (streptococcus, group a), quantification

A detection test by nucleic acid for Group A Strep is a diagnostic procedure that identifies the presence and quantity of streptococcus bacteria in your body. This test uses a sample, usually a throat swab, to detect the bacteria's genetic material. It helps in diagnosing infections like strep throat.

This service was performed 60 times for 56 patients

Detection test by nucleic acid for strep (streptococcus, group b), amplified probe technique

A detection test by nucleic acid for Group B Strep uses an amplified probe technique. This test identifies the presence of Group B Strep bacteria in the body. It involves collecting a sample, usually a swab, which is then examined in a lab for the bacteria's genetic material.

This service was performed 212 times for 174 patients

Detection test by nucleic acid for vancomycin resistance strep (vre), amplified probe technique

The detection test by nucleic acid for vancomycin-resistant strep (VRE) is a laboratory procedure. It uses an amplified probe technique to identify specific genetic material in bacteria. This helps determine if the bacteria are resistant to the antibiotic vancomycin.

This service was performed 253 times for 208 patients

Detection test for candida species (yeast), amplified probe technique

This test helps identify Candida, a type of fungus often present in the human body. An amplified probe technique is used, which enhances detection of the fungus in a sample. This method increases the accuracy of the test, helping to determine the best treatment.

This service was performed 712 times for 123 patients

Drug test(s), definitive, utilizing (1) drug identification methods able to identify individual drugs and distinguish between structural isomers (but not necessarily stereoisomers), including, but not limited to gc/ms (any type, single or tandem) and lc/ms

A definitive drug test identifies specific drugs in your system. Advanced methods like GC/MS (Gas Chromatography/Mass Spectrometry) and LC/MS (Liquid Chromatography/Mass Spectrometry) are used. These can distinguish between similar drugs, providing precise results.

This service was performed 73 times for 56 patients

Ferritin (blood protein) level

A Ferritin level test measures the amount of ferritin, a protein that stores iron, in your blood. It helps determine how much iron your body is storing. If levels are low, it may indicate iron deficiency, while high levels could signify conditions like iron overload.

This service was performed 15 times for 14 patients

Folic acid level, serum

A Folic Acid Level, Serum test measures the amount of folic acid, a type of B vitamin, in your blood. This vitamin is important for cell growth and development. It's crucial for your body to function well. If your levels are low, it may indicate a deficiency, which can lead to health issues.

This service was performed 23 times for 21 patients

Hemoglobin a1c level

Hemoglobin A1c (HbA1c) is a test that measures your average blood sugar level over the past 2-3 months. It's used to monitor how well diabetes is being controlled. High levels may indicate that your diabetes treatment plan needs adjustment.

This service was performed 104 times for 89 patients

Infectious agent detection by nucleic acid (dna or rna); severe acute respiratory syndrome coronavirus 2 (sars-cov-2) (coronavirus disease [covid-19]), amplified probe technique, cdc or non-cdc, making use of high throughput technologies, completed within

This is a test to detect the COVID-19 virus. It uses a technique that amplifies the virus's genetic material (DNA or RNA) for detection. High throughput technologies are used for rapid and large-scale testing. The procedure is completed within a set time frame.

This service was performed 1,473 times for 287 patients

Infectious agent detection by nucleic acid (dna or rna); severe acute respiratory syndrome coronavirus 2 (sars-cov-2) (coronavirus disease [covid-19]), amplified probe technique, making use of high throughput technologies as described by cms-2020-01-r

This is a test for COVID-19. It uses high-tech methods to find the virus's genetic material in your body. The amplified probe technique helps detect the virus even in small amounts. This is crucial for early detection and effective treatment.

This service was performed 1,481 times for 291 patients

Insertion of needle into vein for collection of blood sample

This procedure involves inserting a small needle into a vein, typically in your arm, to collect a blood sample. It's a quick and simple process to help diagnose or monitor health conditions. You may feel a small prick, but discomfort is minimal.

This service was performed 910 times for 387 patients

Iron level

An iron level test measures the amount of iron in your blood. Iron is crucial for producing hemoglobin, a protein in red blood cells that carries oxygen throughout your body. This test helps identify iron deficiencies or excesses, which can lead to conditions like anemia or hemochromatosis.

This service was performed 22 times for 20 patients

Kidney function blood test panel

A kidney function blood test panel checks how well your kidneys are working. It measures levels of various substances in your blood, including proteins, electrolytes, and waste products. The results can help detect potential kidney issues early.

This service was performed 30 times for 27 patients

Magnesium level

A magnesium level test is a simple blood test that measures the amount of magnesium in your body. Magnesium is a crucial mineral that helps your nerves, muscles, and heart function properly. The test can help detect health conditions like kidney disease or malnutrition.

This service was performed 115 times for 73 patients

Manual urinalysis test with examination using microscope, automated

A manual urinalysis test with automated microscopic examination is a lab process that checks your urine for health indicators. It involves a machine scanning your sample to identify any abnormal elements, which can assist in diagnosing various conditions.

This service was performed 143 times for 105 patients

Measurement c-reactive protein for detection of infection or inflammation

C-reactive protein (CRP) test is a blood test that checks for signs of inflammation or infection in the body. High levels of CRP often suggest that there's inflammation or a bacterial infection. This test helps in monitoring and managing conditions like arthritis and heart disease.

This service was performed 13 times for 13 patients

Natriuretic peptide (heart and blood vessel protein) level

A natriuretic peptide level test is a blood test that helps doctors check for heart failure. It measures the amount of certain proteins that your heart and blood vessels produce when they are under stress. High levels may indicate heart disease.

This service was performed 62 times for 45 patients

Red blood cell sedimentation rate, to detect inflammation, automated

The Red Blood Cell Sedimentation Rate is a test that helps detect inflammation in the body. It's automated, meaning a machine does the work. This test measures how fast red blood cells settle at the bottom of a tube in an hour. A faster rate may indicate inflammation.

This service was performed 16 times for 16 patients

Specimen collection for severe acute respiratory syndrome coronavirus 2 (sars-cov-2) (coronavirus disease [covid-19]), any specimen source

Specimen collection for SARS-CoV-2, the virus causing COVID-19, involves taking a sample from the nose or throat using a swab. This sample is then analyzed in a lab to detect the presence of the virus. It's a crucial step in diagnosing COVID-19.

This service was performed 106 times for 48 patients

Thyroxine (thyroid chemical), free

The Thyroxine (thyroid chemical), free test is a blood test that measures the level of free T4 in your body. T4 is a hormone produced by your thyroid gland and is essential for growth and metabolism. If your T4 levels are too high or too low, it could indicate a thyroid disorder.

This service was performed 35 times for 32 patients

Transferrin (iron binding protein) level

A transferrin level test measures the amount of transferrin, a protein that carries iron, in your blood. This can help determine if your body has an iron deficiency or overload. It's a simple blood test and can provide valuable information about your overall health.

This service was performed 20 times for 18 patients

Travel allowance one way in connection with medically necessary laboratory specimen collection drawn from home bound or nursing home bound patient; prorated miles actually travelled

This service covers travel costs for healthcare professionals to collect necessary lab specimens from patients who are homebound or in nursing homes. The allowance is calculated based on the actual miles traveled to perform this service.

This service was performed 299 times for 22 patients

Travel allowance one way in connection with medically necessary laboratory specimen collection drawn from home bound or nursing home bound patient; prorated miles actually travelled

This service covers travel costs for healthcare professionals to collect necessary lab specimens from patients who are homebound or in nursing homes. The allowance is calculated based on the actual miles traveled to perform this service.

This service was performed 7,073 times for 316 patients

Travel allowance one way in connection with medically necessary laboratory specimen collection drawn from home bound or nursing home bound patient; prorated trip charge

This service involves a healthcare professional traveling to collect necessary lab samples from patients who are homebound or in a nursing home. The travel allowance is a partial charge for the trip made to facilitate this service. It ensures medical care accessibility for all, regardless of mobility.

This service was performed 71 times for 47 patients

Uric acid level, blood

A blood uric acid level test measures the amount of uric acid in your blood. Uric acid is a waste product that your body produces when it breaks down purines, substances found in your body and in certain foods. High levels may lead to gout or kidney stones.

This service was performed 15 times for 11 patients

Vitamin d-3 level

A Vitamin D-3 level test measures the amount of Vitamin D-3, a crucial nutrient, in your body. This test helps identify if your levels are too low or too high. Low levels may lead to bone weakness, while high levels could harm your kidneys. It's a simple blood test.

This service was performed 56 times for 50 patients

Vldl cholesterol level

The VLDL cholesterol level test measures the amount of very-low-density lipoprotein in your blood. VLDL carries triglycerides, a type of fat, in the body. High VLDL levels can lead to the buildup of cholesterol in your arteries, increasing heart disease risk. Regular testing helps maintain a healthy balance.

This service was performed 123 times for 117 patients

Reviews for ABSOLUTE DIAGNOSTICS, LLC

There are currently no reviews for this provider. Be the first person to share your experience with this provider by filling out our review form. Your insights are appreciated and will help others make informed decisions.

Frequently Asked Questions