DR. TAMMY ELIZABETH ROQUE MD
NPI 1376581330
Internal Medicine - Medical Oncology in Sherman, TX

Iron sucrose injection is a treatment given to replenish iron in your body, often used when oral iron supplements are not effective. This helps your body make red blood cells, improving health and energy levels.

Paclitaxel is a medication administered via injection to treat various types of cancer. It works by inhibiting cell division, thus preventing cancer cells from growing and multiplying. Each dose is tailored to the patient's body size.

Darbepoetin alfa injection is a medication used to treat anemia (low red blood cell count) often caused by chronic kidney disease or chemotherapy. It works by stimulating your body to produce more red blood cells, helping to increase your energy and well-being.

Low osmolar contrast material with 300-399 mg/ml iodine concentration is a diagnostic tool used in imaging procedures. It helps to enhance the visibility of specific areas in the body, aiding in accurate diagnosis. It's safe and generally well-tolerated by patients.

Denosumab is a medication given via injection to strengthen your bones. It works by slowing down the cells that break down bone, improving bone density and reducing the risk of fractures. It's often used for osteoporosis treatment.

Dexamethasone sodium phosphate is a medication given via injection. It is a type of steroid that helps reduce inflammation and immune responses. It can be used to treat a variety of conditions, such as allergies, skin conditions, arthritis, and more.

This procedure involves an intravenous injection of Octagam, a liquid immune globulin. It is a blood product that helps your body fight off infections. It's given through a vein (IV) and each dose contains 500 mg of the medication.

Docetaxel is a medication given via injection to treat various types of cancer. It works by stopping cancer cells from growing and dividing. Each injection contains 1 mg of docetaxel. Side effects can occur, so regular monitoring is essential.

Palonosetron HCL is an injection used to prevent nausea and vomiting caused by chemotherapy. It works by blocking a natural substance (serotonin) in the body that can cause vomiting. This helps improve your comfort during cancer treatment.

Granisetron hydrochloride is an anti-nausea medication given by injection. It helps prevent nausea and vomiting often caused by cancer treatments like chemotherapy. Its dosage is measured in micrograms (mcg).

This procedure involves inserting a small needle into a vein, typically in your arm, to collect a blood sample. It's a quick and simple process to help diagnose or monitor health conditions. You may feel a small prick, but discomfort is minimal.

A Complete Blood Cell Count is a common test that measures various components of the blood, including red cells (carry oxygen), white cells (fight infection), and platelets (help blood clot). An automated test ensures accuracy. The differential count provides detailed information about white cell types.

A comprehensive group of blood chemicals test, also known as a comprehensive metabolic panel, is a blood test that measures your sugar level, electrolyte and fluid balance, kidney function, and liver function. This helps to check your body's overall health.

Leucovorin calcium is an injection given to enhance the effectiveness of certain cancer treatments or to reduce the harmful effects of some medications. The dose is determined by your doctor and is typically administered in a healthcare setting.

Bevacizumab-awwb (Mvasi) is a biosimilar medication given through injection. It's designed to interfere with the growth of cancer cells by blocking their blood supply. It's commonly used in treating various types of cancer. Each dosage contains 10 mg of the medicine.

Fluorouracil is a chemotherapy drug, given as an injection to treat various types of cancer. The 500 mg dose helps to stop cancer cells from growing and multiplying. You might feel some side effects, but these are typically manageable.

This is a routine check-up for patients who have previously visited our clinic. It involves a comprehensive review of your health and any ongoing treatments. The consultation lasts between 30-39 minutes, allowing enough time to discuss any concerns.

This procedure involves introducing a new medication or substance into your bloodstream via a vein. It's typically done using a small needle. The substance can help treat various conditions or assist in diagnostic procedures. It's generally safe and monitored by professionals.

Chemotherapy is a treatment that uses drugs to destroy cancer cells. When administered into a vein, it's often through an IV. This procedure usually lasts 1 hour or less. You may feel a slight pinch as the needle is inserted, but it's generally painless.

This is a routine visit for patients who have already been seen by the healthcare provider. During this approximately 20-29 minute appointment, your health status will be evaluated and any necessary treatments or tests will be discussed. It's a chance to address any health concerns you may have.

Zoledronic acid is a medication given via injection to strengthen bones. It's often used in patients with osteoporosis or certain types of cancer. The injection helps reduce the risk of fractures and other bone complications.

Carboplatin is a chemotherapy drug used to treat various types of cancer by slowing or stopping the growth of cancer cells. The 50 mg injection is administered into a vein by a healthcare professional. Side effects may occur.

This procedure involves injecting fluids or medication directly into your vein. It's used for treatment, prevention, or diagnosis. An additional sequential infusion may be given within an hour if needed. This helps to ensure the medicine is distributed effectively in your body.

This is a procedure where a medical professional inserts a small tube into your vein to deliver medication, nutrients, or fluids directly into your bloodstream. This can be for treatment, prevention, or diagnosis. The process typically takes less than an hour.

This procedure involves giving anti-cancer drugs, which don't contain hormones, into the muscle or under the skin. These drugs help to stop the growth of cancer cells. The process is usually quick and done by a healthcare professional.

A Ferritin level test measures the amount of ferritin, a protein that stores iron, in your blood. It helps determine how much iron your body is storing. If levels are low, it may indicate iron deficiency, while high levels could signify conditions like iron overload.

An iron level test measures the amount of iron in your blood. Iron is crucial for producing hemoglobin, a protein in red blood cells that carries oxygen throughout your body. This test helps identify iron deficiencies or excesses, which can lead to conditions like anemia or hemochromatosis.

Iron binding capacity is a blood test that measures how well your body can bind and transport iron. This helps your healthcare provider assess if your body has too little or too much iron, which can indicate certain health conditions.

This procedure involves administering medication directly under the skin or into a muscle. A small needle is used to inject the drug, allowing it to be absorbed quickly into the bloodstream. It's a common method for delivering a variety of medications.

Chemotherapy is a treatment method that uses drugs to destroy cancer cells. The drugs are administered into a vein, usually in the arm. Each additional hour of chemotherapy allows for more of the medication to enter your bloodstream to fight against the cancer cells.

Leuprolide acetate is a medication that helps regulate certain hormone levels in your body. It's injected into your muscle once a month. This treatment can help manage various health conditions related to hormone imbalance. Always follow your doctor's instructions.

Diphenhydramine HCL injection is a medicine given to alleviate symptoms of allergies, colds, or hay fever. It can also help with motion sickness and certain symptoms of Parkinson's disease. Up to 50 mg may be administered depending on your condition.

This procedure involves introducing a new drug or substance into your vein, typically via an IV drip. It lasts for an hour or less. This method allows the substance to quickly reach your bloodstream, ensuring rapid and effective treatment.

Irrigation of an implanted venous access drug delivery device is a procedure to clean or unblock the device. This device is implanted under your skin to allow easy, frequent, and long-term access to your veins for medication delivery. The process involves flushing the device with a sterile solution to ensure it works properly.

This procedure involves the injection of hormone-based anti-cancer drugs under the skin or into a muscle. These medications help to slow down or stop the growth of certain types of cancer cells. The process is usually quick and can be performed in a clinic or hospital.

An infusion into a vein is a method of delivering medication, nutrients, or fluids directly into your bloodstream. If it's concurrent with another infusion, it means two different solutions are given at the same time. This can be for treatment, prevention, or diagnostic purposes.

Chemotherapy is a treatment method that uses drugs to destroy cancer cells. In the office, a pump is used to start an intravenous infusion of these drugs. The infusion can then be continued at home or another setting, like a rest home.

Unclassified drugs are medications that don't fit into an existing category or class due to their unique properties or uses. They may be used for various conditions and their effects may differ widely. Always ask your healthcare provider for more information about these drugs.

This is a lab test where a small sample of your blood is studied under a microscope. The goal is to count the number of white blood cells, which are crucial for your body's immune response. The count can help identify potential health issues.

A complete blood cell count (CBC) is an automated test that measures different components of the blood, including red cells, white cells, and platelets. It helps assess overall health, detect disorders like anemia or infection, and monitor medical treatments.

A CT scan of the chest with contrast is an imaging procedure. A special dye (contrast) is used to highlight specific areas in your body, providing clearer pictures of your chest. This helps in diagnosing conditions related to your lungs, heart, and other chest structures.

A magnesium level test is a simple blood test that measures the amount of magnesium in your body. Magnesium is a crucial mineral that helps your nerves, muscles, and heart function properly. The test can help detect health conditions like kidney disease or malnutrition.

A Lactate Dehydrogenase level test measures the amount of this enzyme in your body. It's often done when tissue damage is suspected, as high levels can indicate issues like heart disease, lung disease, liver disease, or blood disorders. This test helps in diagnosing and monitoring these conditions.

This procedure involves delivering medication, fluids, or nutrients directly into your vein. This is done to treat, prevent, or diagnose various conditions. Each additional hour refers to the extended time you may need to receive these substances for optimal results.

This procedure involves injecting a new medication or substance directly into your vein using a method called the 'push' technique. It's a quick way to deliver medication into your bloodstream for fast-acting relief or treatment.

Fluorodeoxyglucose F-18 FDG is a radioactive drug used in PET scans. It helps doctors see how your tissues and organs are functioning. The drug is given in a specific dose, up to 45 millicuries, depending on your body size and the type of scan.

Magnesium sulfate injection, per 500 mg, is a medication administered to manage certain health conditions. It aids in controlling seizures in conditions like eclampsia and in managing severe asthma attacks. It's also used to prevent premature labor in pregnant women.

A nuclear medicine study from skull base to mid-thigh with a CT scan involves using a small amount of radioactive material and CT imaging to examine body tissues and organs. This helps detect any abnormalities by providing detailed images of the body's internal structure.

A CT scan of the abdomen and pelvis with contrast is an imaging procedure. A special dye, called contrast, is used to make certain areas more visible. This can help identify issues such as infections, tumors, or other abnormalities. The procedure is painless and usually takes about 30 minutes.

Reticulated (young) platelet measurement is a blood test that helps determine the number of new platelets your body is producing. It's useful for diagnosing and monitoring conditions affecting platelet production, like anemia or chemotherapy effects.

An infusion of normal saline solution, 1000 cc, is a common medical procedure. It involves introducing a saltwater solution into your bloodstream via an intravenous (IV) line. This helps to hydrate your body, correct electrolyte imbalances, and deliver medications if needed.

This is a blood test that measures the level of CA 15-3, a protein often higher in individuals with certain types of cancer. It helps monitor response to treatment and check for cancer recurrence. It's not a standalone diagnostic test but used alongside other evaluations.

A CT scan of the chest without contrast is a non-invasive imaging procedure. It uses special X-ray equipment to produce detailed images of your chest area, including your lungs and heart. It can help diagnose conditions such as lung diseases or heart disorders. It doesn't involve any dyes or contrast agents.

A manual urinalysis test with automated microscopic examination is a lab process that checks your urine for health indicators. It involves a machine scanning your sample to identify any abnormal elements, which can assist in diagnosing various conditions.

Drawing blood is a simple procedure where a needle is inserted into a vein, usually in your arm, to collect a small sample. This sample helps in diagnosing any medical issues you may have. You might feel a small prick, but overall, it's a quick and safe process.

Follow-up hospital inpatient care involves daily check-ups while you're admitted in the hospital. Typically, a healthcare provider spends about 25 minutes each day reviewing your condition, adjusting treatment if needed, and answering any questions you might have.

This is a procedure where a sterile solution is administered into your vein to help restore body fluid balance. It typically lasts between 31-60 minutes. It's a safe, common treatment for dehydration or to deliver medication.

This is a routine check-up for patients who have previously seen the doctor. During this 10-19 minute visit, the doctor will review your health status, discuss any concerns, and manage ongoing treatments or medications. It's a chance to ensure your health is on track.

An on-body injector is a device used to deliver medication under the skin. It's applied to a clean area of skin, usually the abdomen or back of the arm. The device is activated to inject the medication slowly, ensuring a steady absorption. It's a painless, safe, and effective way to administer certain types of medication.

Follow-up hospital inpatient care per day typically involves a 35-minute check-up by your healthcare provider. This service includes monitoring your health progress, adjusting your treatment plan if needed, and answering any questions you may have about your condition or care.

A CT scan of the abdomen and pelvis is a non-invasive medical test. It uses special X-ray equipment to create detailed images of your abdominal and pelvic areas. This helps doctors examine organs, tissues, and vessels. No contrast dye is used in this procedure.

PSA measurement is a simple blood test that checks for a specific protein produced by your body. High levels could indicate a health issue that needs further investigation. It's often used to monitor general wellness and is part of routine health screening.