DR. RONALD L DRENGLER M.D.
NPI 1265459168
Internal Medicine - Medical Oncology in San Antonio, TX

Aprepitant injection is a medication used to prevent nausea and vomiting caused by chemotherapy. It works by blocking certain substances in the brain that trigger these symptoms. The dosage is based on your medical condition and response to treatment.

Ipilimumab is an immunotherapy medication given via injection to boost the body's immune response against cancer. It works by blocking a protein that prevents immune cells from attacking cancer cells. Each injection contains 1 mg of the drug.

Atropine sulfate is a medication given via injection to regulate heart rate or treat certain types of poisoning. The 0.01 mg dosage is carefully measured to provide effective, safe treatment.

Dexamethasone sodium phosphate is a medication given via injection. It is a type of steroid that helps reduce inflammation and immune responses. It can be used to treat a variety of conditions, such as allergies, skin conditions, arthritis, and more.

Epoetin alfa-epbx (Retacrit) is a biosimilar injection used for non-ESRD (End-Stage Renal Disease). It helps your body make more red blood cells, increasing your energy and well-being. It's usually given under the skin or into a vein by a healthcare professional.

Ferric derisomaltose is an iron replacement product. It's given as an injection to treat iron deficiency anemia, a condition where the body lacks enough iron. The injection helps increase iron in your body to healthy levels.

Ondansetron hydrochloride is a medication given via injection to help prevent nausea and vomiting, often due to chemotherapy or surgery. It works by blocking certain chemicals in the body that trigger these symptoms.

A Lactate Dehydrogenase level test measures the amount of this enzyme in your body. It's often done when tissue damage is suspected, as high levels can indicate issues like heart disease, lung disease, liver disease, or blood disorders. This test helps in diagnosing and monitoring these conditions.

Palonosetron HCL is an injection used to prevent nausea and vomiting caused by chemotherapy. It works by blocking a natural substance (serotonin) in the body that can cause vomiting. This helps improve your comfort during cancer treatment.

Leucovorin calcium is an injection given to enhance the effectiveness of certain cancer treatments or to reduce the harmful effects of some medications. The dose is determined by your doctor and is typically administered in a healthcare setting.

Potassium chloride injection is a treatment to replenish low potassium levels in your body. Each 2 meq dose helps maintain heart function and fluid balance. It's administered by a healthcare professional, usually into a vein.

A comprehensive group of blood chemicals test, also known as a comprehensive metabolic panel, is a blood test that measures your sugar level, electrolyte and fluid balance, kidney function, and liver function. This helps to check your body's overall health.

Irinotecan is a chemotherapy drug given by injection to treat certain types of cancer. It works by slowing or stopping the growth of cancer cells. The 20 mg dosage refers to the amount of medication in each injection. Side effects can occur, so regular monitoring is key.

A Complete Blood Cell Count is a common test that measures various components of the blood, including red cells (carry oxygen), white cells (fight infection), and platelets (help blood clot). An automated test ensures accuracy. The differential count provides detailed information about white cell types.

This procedure involves inserting a small needle into a vein, typically in your arm, to collect a blood sample. It's a quick and simple process to help diagnose or monitor health conditions. You may feel a small prick, but discomfort is minimal.

Fluorouracil is a chemotherapy drug, given as an injection to treat various types of cancer. The 500 mg dose helps to stop cancer cells from growing and multiplying. You might feel some side effects, but these are typically manageable.

This procedure involves injecting fluids or medication directly into your vein. It's used for treatment, prevention, or diagnosis. An additional sequential infusion may be given within an hour if needed. This helps to ensure the medicine is distributed effectively in your body.

Chemotherapy is a treatment that uses drugs to destroy cancer cells. When administered into a vein, it's often through an IV. This procedure usually lasts 1 hour or less. You may feel a slight pinch as the needle is inserted, but it's generally painless.

This is a routine check-up for patients who have previously visited our clinic. It involves a comprehensive review of your health and any ongoing treatments. The consultation lasts between 30-39 minutes, allowing enough time to discuss any concerns.

This procedure involves administering medication directly under the skin or into a muscle. A small needle is used to inject the drug, allowing it to be absorbed quickly into the bloodstream. It's a common method for delivering a variety of medications.

This procedure involves introducing a new medication or substance into your bloodstream via a vein. It's typically done using a small needle. The substance can help treat various conditions or assist in diagnostic procedures. It's generally safe and monitored by professionals.

This procedure involves introducing a new drug or substance into your vein, typically via an IV drip. It lasts for an hour or less. This method allows the substance to quickly reach your bloodstream, ensuring rapid and effective treatment.

Magnesium sulfate injection, per 500 mg, is a medication administered to manage certain health conditions. It aids in controlling seizures in conditions like eclampsia and in managing severe asthma attacks. It's also used to prevent premature labor in pregnant women.

Cisplatin is a chemotherapy drug, given as an injection to treat various types of cancer. It works by damaging cancer cell DNA, preventing them from dividing and growing. This 10 mg dose is either a powder or solution, prepared by a healthcare professional.

This service involves a follow-up appointment for existing patients, lasting between 40 to 54 minutes. During this time, your healthcare provider will assess your current health status, discuss any changes or concerns, review your treatment plan, and answer any questions you may have.

Carcinoembryonic Antigen (CEA) protein level is a blood test often used in cancer care. It measures the amount of CEA protein in your blood, which can increase in cases of certain types of cancer. It's used to monitor treatment progress and check for cancer recurrence.

A magnesium level test is a simple blood test that measures the amount of magnesium in your body. Magnesium is a crucial mineral that helps your nerves, muscles, and heart function properly. The test can help detect health conditions like kidney disease or malnutrition.

Carboplatin is a chemotherapy drug used to treat various types of cancer by slowing or stopping the growth of cancer cells. The 50 mg injection is administered into a vein by a healthcare professional. Side effects may occur.

CA 19-9 is a type of protein found on the surface of some cancer cells. An immunologic analysis is a lab test that measures the level of CA 19-9 in your blood. High levels may suggest the presence of certain types of cancer, but further testing is needed for a definitive diagnosis.

The Thyroxine (thyroid chemical), free test is a blood test that measures the level of free T4 in your body. T4 is a hormone produced by your thyroid gland and is essential for growth and metabolism. If your T4 levels are too high or too low, it could indicate a thyroid disorder.

Chemotherapy is a treatment method that uses drugs to destroy cancer cells. The drugs are administered into a vein, usually in the arm. Each additional hour of chemotherapy allows for more of the medication to enter your bloodstream to fight against the cancer cells.

A complete blood cell count (CBC) is an automated test that measures different components of the blood, including red cells, white cells, and platelets. It helps assess overall health, detect disorders like anemia or infection, and monitor medical treatments.

Unclassified drugs are medications that don't fit into an existing category or class due to their unique properties or uses. They may be used for various conditions and their effects may differ widely. Always ask your healthcare provider for more information about these drugs.

The total Creatine Kinase (CK) level test is a blood test that helps assess the health of your heart. It measures an enzyme called CK that's released into the bloodstream when heart or other muscle tissue is damaged. High levels may indicate a heart attack or muscle disorder.

The T3 measurement, free, is a blood test that checks the level of a hormone called triiodothyronine. This hormone is produced by your thyroid, a small gland in your neck. It plays a key role in regulating your body's metabolism and energy use.

Troponin analysis is a blood test that checks for damage to the heart. Elevated levels of troponin, a protein in heart cells, can indicate a heart attack. This test helps in early detection and management of heart-related issues.

Diphenhydramine HCL injection is a medicine given to alleviate symptoms of allergies, colds, or hay fever. It can also help with motion sickness and certain symptoms of Parkinson's disease. Up to 50 mg may be administered depending on your condition.

This is a procedure where a medical professional inserts a small tube into your vein to deliver medication, nutrients, or fluids directly into your bloodstream. This can be for treatment, prevention, or diagnosis. The process typically takes less than an hour.

This is a routine visit for patients who have already been seen by the healthcare provider. During this approximately 20-29 minute appointment, your health status will be evaluated and any necessary treatments or tests will be discussed. It's a chance to address any health concerns you may have.

Amylase is an enzyme that helps break down starches into sugars during digestion. An amylase level test measures the amount of this enzyme in your blood or urine. This test helps identify conditions like pancreatitis or other digestive issues.

A Lipase Level test measures the amount of lipase in your blood. Lipase is an enzyme that helps your body digest fats. High or low levels can indicate problems with your pancreas, such as pancreatitis or other conditions. This test helps your doctor diagnose and monitor these conditions.

An infusion into a vein is a method of delivering medication, nutrients, or fluids directly into your bloodstream. If it's concurrent with another infusion, it means two different solutions are given at the same time. This can be for treatment, prevention, or diagnostic purposes.

Chemotherapy is a treatment method that uses drugs to destroy cancer cells. In the office, a pump is used to start an intravenous infusion of these drugs. The infusion can then be continued at home or another setting, like a rest home.

An infusion of normal saline solution, 1000 cc, is a common medical procedure. It involves introducing a saltwater solution into your bloodstream via an intravenous (IV) line. This helps to hydrate your body, correct electrolyte imbalances, and deliver medications if needed.

This procedure involves delivering medication, fluids, or nutrients directly into your vein. This is done to treat, prevent, or diagnose various conditions. Each additional hour refers to the extended time you may need to receive these substances for optimal results.

An iron level test measures the amount of iron in your blood. Iron is crucial for producing hemoglobin, a protein in red blood cells that carries oxygen throughout your body. This test helps identify iron deficiencies or excesses, which can lead to conditions like anemia or hemochromatosis.

Iron binding capacity is a blood test that measures how well your body can bind and transport iron. This helps your healthcare provider assess if your body has too little or too much iron, which can indicate certain health conditions.

This test checks for CA 125, a protein often found in higher amounts in individuals with certain types of tumors. It involves analyzing a blood sample in a lab. It's a quantitative test, meaning it measures the level of CA 125 in your blood.

A Ferritin level test measures the amount of ferritin, a protein that stores iron, in your blood. It helps determine how much iron your body is storing. If levels are low, it may indicate iron deficiency, while high levels could signify conditions like iron overload.

This is a combined medication injection used to prevent nausea and vomiting often associated with chemotherapy. Fosnetupitant blocks substance P/neurokinin 1, reducing the urge to vomit. Palonosetron prevents a chemical action in the brain that may cause nausea and vomiting.

Follow-up hospital inpatient care involves daily check-ups while you're admitted in the hospital. Typically, a healthcare provider spends about 25 minutes each day reviewing your condition, adjusting treatment if needed, and answering any questions you might have.

Irrigation of an implanted venous access drug delivery device is a procedure to clean or unblock the device. This device is implanted under your skin to allow easy, frequent, and long-term access to your veins for medication delivery. The process involves flushing the device with a sterile solution to ensure it works properly.

This is a first-time patient visit where a healthcare professional spends 60-74 minutes with you. It involves a comprehensive evaluation, including your medical history and current health condition. They'll also advise on preventive health measures and formulate a treatment plan if needed.

An automated red blood count test is a routine lab procedure to measure the number of red blood cells in your blood. These cells carry oxygen throughout the body. The test helps assess overall health and detect conditions like anemia or polycythemia.

A Cyanocobalamin (Vitamin B-12) level test is a blood test that checks the amount of Vitamin B-12 in your body. This vitamin is vital for nerve function and the creation of red blood cells. Low or high levels could indicate a potential health issue.

PSA measurement is a simple blood test that checks for a specific protein produced by your body. High levels could indicate a health issue that needs further investigation. It's often used to monitor general wellness and is part of routine health screening.

Gammaglobulin measurement is a blood test that checks the levels of certain proteins (gammaglobulins) that the body uses to fight infections. High or low levels can indicate various health conditions. It's a simple, quick procedure with minimal discomfort.

This is a procedure where a sterile solution is administered into your vein to help restore body fluid balance. It typically lasts between 31-60 minutes. It's a safe, common treatment for dehydration or to deliver medication.

This procedure involves delivering fluids directly into your vein to keep your body hydrated. It is typically done when oral hydration is insufficient. Each additional hour means more fluid is infused to ensure adequate hydration.

Mannitol is a diuretic used to reduce swelling and pressure inside the eye or around the brain. The 25% in 50 ml injection indicates the concentration and volume of the mannitol in the solution. It is administered intravenously under medical supervision.

This procedure involves injecting a new medication or substance directly into your vein using a method called the 'push' technique. It's a quick way to deliver medication into your bloodstream for fast-acting relief or treatment.

This is a procedure where a small dose of Vitamin B-12, also known as Cyanocobalamin, is injected into your body. This vitamin is essential for nerve function and the production of red blood cells. It's often used to treat vitamin B-12 deficiency.

A urinalysis is a simple, non-invasive test that checks the urine for various elements such as sugar, protein, and signs of infection. It can help detect many common conditions, including kidney disease and diabetes. The manual test involves a lab technician examining a urine sample.

Follow-up hospital inpatient care per day typically involves a 35-minute check-up by your healthcare provider. This service includes monitoring your health progress, adjusting your treatment plan if needed, and answering any questions you may have about your condition or care.

A phosphate level test measures the amount of phosphate in your blood. Phosphate is a chemical that contains the mineral phosphorus, crucial for energy production, muscle and nerve function, and bone growth. Imbalances may indicate kidney disease or other health issues.

A TSH blood test measures the level of thyroid stimulating hormone in your body. This hormone is produced by the pituitary gland and regulates how your thyroid works. It's a simple procedure where a small amount of blood is drawn from your arm for analysis.

Initial hospital inpatient care per day, typically 70 minutes, refers to the daily medical service provided to patients admitted to the hospital. This includes a comprehensive evaluation, diagnosis, treatment plan, and monitoring of your health condition. It ensures your well-being during your hospital stay.

Initial hospital inpatient care is a service where a healthcare provider spends about 50 minutes per day overseeing your care while you're admitted in the hospital. This includes reviewing your health status, planning your treatment, and ensuring your safety and comfort.

This test helps identify the presence of hepatitis B in your body. It uses an immunoassay technique, which is a highly sensitive method that detects the hepatitis B surface antigen, a protein on the virus. This test can help diagnose an active infection or determine if you're a carrier.

Hepatitis B core antibody measurement is a test conducted to determine if you have been infected with the Hepatitis B virus in the past. It involves taking a blood sample and analyzing it in a lab. This test aids in diagnosing and managing Hepatitis B infections.

A clotting time blood test helps determine how quickly your blood forms clots, a process crucial to stop bleeding. During the test, a small blood sample is taken from your arm. The sample is then analyzed in a lab to see how long it takes for a clot to form.