ADVANCE MEDICAL LAB
NPI 1255657219
Clinical Medical Laboratory in Mission, TX

Areas of Expertise

The following services and procedures, recently provided to Medicare patients, illustrate the range of care this provider offers. This list reflects the variety of services available to all patients visiting the practice and is based on 2022 Medicare dataset. In general, the more frequently a provider treats specific conditions or performs particular procedures, the more experienced they become in addressing similar patient needs. The provider has delivered many of the services listed below to Medicare patients. Please note that this list does not include services provided to patients who are not covered by Medicare.

Ammonia level

An ammonia level test measures the amount of ammonia in your blood. Too much ammonia in your blood can cause confusion, lethargy, or even coma. It's often used to check liver function or to see if treatments for liver disease are working. It's a simple blood draw.

This service was performed 113 times for 59 patients

Bacterial blood culture

A bacterial blood culture is a test to check for bacteria or other microorganisms in your blood. A small amount of blood is taken from your vein and sent to a lab. If bacteria are present, they will grow and can be identified, helping to guide treatment.

This service was performed 31 times for 16 patients

Bacterial colony count, urine

A bacterial colony count, urine, is a laboratory test that checks a urine sample for bacteria. It helps to identify if an infection is present in the urinary system. High numbers of bacteria in the urine can indicate a urinary tract infection (UTI).

This service was performed 221 times for 152 patients

Bacterial culture for aerobic isolates

A bacterial culture for aerobic isolates is a lab test that helps identify bacteria that thrive in oxygen-rich environments. A sample from the suspected infection site is collected, then placed in a special medium that promotes bacterial growth. After a set period, the lab identifies any bacteria present, aiding in accurate diagnosis and treatment.

This service was performed 324 times for 190 patients

Bacterial culture, any other source except urine, blood or stool, aerobic

A bacterial culture is a test that helps identify harmful bacteria in your body. In this case, a sample from any part other than urine, blood or stool is collected. The sample is placed in a special environment to promote bacteria growth. It helps in diagnosing infections and determining the best treatment.

This service was performed 33 times for 20 patients

Bacterial urine culture

A bacterial urine culture is a laboratory test that checks for bacteria in your urine. It helps identify the type of bacteria causing an infection, enabling the selection of the most effective treatment. The test involves collecting a urine sample in a sterile container.

This service was performed 269 times for 177 patients

Bilirubin level, direct

A direct bilirubin test measures a form of bilirubin in your blood. Bilirubin is a substance produced during the normal breakdown of red blood cells. High levels may indicate liver or blood disorders. This test helps diagnose and monitor these conditions.

This service was performed 13 times for 13 patients

Blood creatinine level

A blood creatinine level test measures the amount of creatinine in your blood. Creatinine is a waste product that your body produces when it uses energy. High levels may indicate that your kidneys aren't working properly. This test is often used to monitor kidney health.

This service was performed 20 times for 13 patients

Blood test, basic group of blood chemicals (calcium, total)

A basic group blood test measures the levels of certain chemicals in your blood, including calcium. This helps assess your overall health and detect potential problems. The procedure involves drawing a small amount of blood from your arm, which is then analyzed in a lab.

This service was performed 268 times for 179 patients

Blood test, clotting time

A clotting time blood test helps determine how quickly your blood forms clots, a process crucial to stop bleeding. During the test, a small blood sample is taken from your arm. The sample is then analyzed in a lab to see how long it takes for a clot to form.

This service was performed 155 times for 56 patients

Blood test, comprehensive group of blood chemicals

A comprehensive group of blood chemicals test, also known as a comprehensive metabolic panel, is a blood test that measures your sugar level, electrolyte and fluid balance, kidney function, and liver function. This helps to check your body's overall health.

This service was performed 1,900 times for 1,015 patients

Blood test, lipids (cholesterol and triglycerides)

A lipid panel is a blood test that measures fats and fatty substances, such as cholesterol and triglycerides. These substances are used by your body as a source of energy. High levels can lead to health issues, including heart disease.

This service was performed 949 times for 702 patients

Blood test, thyroid stimulating hormone (tsh)

A TSH blood test measures the level of thyroid stimulating hormone in your body. This hormone is produced by the pituitary gland and regulates how your thyroid works. It's a simple procedure where a small amount of blood is drawn from your arm for analysis.

This service was performed 821 times for 623 patients

Coagulation assessment blood test, plasma or whole blood

A coagulation assessment blood test evaluates how well your blood clots, helping identify potential bleeding or clotting disorders. This test uses a sample of your plasma or whole blood. It's a standard procedure to ensure your body's clotting process is functioning properly.

This service was performed 30 times for 27 patients

Collection of venous blood by venipuncture or urine sample by catheterization from an individual in a skilled nursing facility (snf) or by a laboratory on behalf of a home health agency (hha)

This procedure involves obtaining a blood sample from a vein (venipuncture) or a urine sample via a tube (catheterization). It's performed in a skilled nursing facility or by a lab for a home health agency. This helps in diagnosing and monitoring health conditions.

This service was performed 681 times for 145 patients

Collection of venous blood by venipuncture or urine sample by catheterization from an individual in a skilled nursing facility (snf) or by a laboratory on behalf of a home health agency (hha)

This procedure involves obtaining a blood sample from a vein (venipuncture) or a urine sample via a tube (catheterization). It's performed in a skilled nursing facility or by a lab for a home health agency. This helps in diagnosing and monitoring health conditions.

This service was performed 1,854 times for 1,053 patients

Complete blood cell count (red cells, white blood cell, platelets), automated test and automated differential white blood cell count

A Complete Blood Cell Count is a common test that measures various components of the blood, including red cells (carry oxygen), white cells (fight infection), and platelets (help blood clot). An automated test ensures accuracy. The differential count provides detailed information about white cell types.

This service was performed 2,206 times for 1,104 patients

Creatine kinase (cardiac enzyme) level, total

The total Creatine Kinase (CK) level test is a blood test that helps assess the health of your heart. It measures an enzyme called CK that's released into the bloodstream when heart or other muscle tissue is damaged. High levels may indicate a heart attack or muscle disorder.

This service was performed 30 times for 15 patients

Creatinine level to test for kidney function or muscle injury

A creatinine level test measures the amount of creatinine in your blood. This substance is a waste product from normal muscle use. Higher levels can indicate possible kidney dysfunction or muscle injury. This test helps monitor kidney health.

This service was performed 188 times for 131 patients

Cyanocobalamin (vitamin b-12) level

A Cyanocobalamin (Vitamin B-12) level test is a blood test that checks the amount of Vitamin B-12 in your body. This vitamin is vital for nerve function and the creation of red blood cells. Low or high levels could indicate a potential health issue.

This service was performed 190 times for 155 patients

Evaluation of antimicrobial drug (antibiotic, antifungal, antiviral), microdilution or agar dilution

This process checks how well certain drugs, like antibiotics, can fight against infections. It involves mixing the drug with a microbe (like bacteria or a virus) in a lab. By observing how the microbe reacts, it helps determine the best drug to treat your infection.

This service was performed 2,426 times for 177 patients

Ferritin (blood protein) level

A Ferritin level test measures the amount of ferritin, a protein that stores iron, in your blood. It helps determine how much iron your body is storing. If levels are low, it may indicate iron deficiency, while high levels could signify conditions like iron overload.

This service was performed 65 times for 48 patients

Folic acid level, serum

A Folic Acid Level, Serum test measures the amount of folic acid, a type of B vitamin, in your blood. This vitamin is important for cell growth and development. It's crucial for your body to function well. If your levels are low, it may indicate a deficiency, which can lead to health issues.

This service was performed 98 times for 91 patients

Hemoglobin a1c level

Hemoglobin A1c (HbA1c) is a test that measures your average blood sugar level over the past 2-3 months. It's used to monitor how well diabetes is being controlled. High levels may indicate that your diabetes treatment plan needs adjustment.

This service was performed 707 times for 539 patients

Iron binding capacity

Iron binding capacity is a blood test that measures how well your body can bind and transport iron. This helps your healthcare provider assess if your body has too little or too much iron, which can indicate certain health conditions.

This service was performed 111 times for 81 patients

Iron level

An iron level test measures the amount of iron in your blood. Iron is crucial for producing hemoglobin, a protein in red blood cells that carries oxygen throughout your body. This test helps identify iron deficiencies or excesses, which can lead to conditions like anemia or hemochromatosis.

This service was performed 127 times for 91 patients

Kidney function blood test panel

A kidney function blood test panel checks how well your kidneys are working. It measures levels of various substances in your blood, including proteins, electrolytes, and waste products. The results can help detect potential kidney issues early.

This service was performed 74 times for 44 patients

Lipase (fat enzyme) level

A Lipase Level test measures the amount of lipase in your blood. Lipase is an enzyme that helps your body digest fats. High or low levels can indicate problems with your pancreas, such as pancreatitis or other conditions. This test helps your doctor diagnose and monitor these conditions.

This service was performed 11 times for 11 patients

Liver function blood test panel

A liver function blood test panel helps check the health of your liver. It measures various proteins, liver enzymes, and bilirubin in your blood. If these levels are too high or too low, it could signal a liver problem. It's a simple, non-invasive test that involves drawing blood.

This service was performed 45 times for 40 patients

Magnesium level

A magnesium level test is a simple blood test that measures the amount of magnesium in your body. Magnesium is a crucial mineral that helps your nerves, muscles, and heart function properly. The test can help detect health conditions like kidney disease or malnutrition.

This service was performed 236 times for 117 patients

Manual urinalysis test with examination using microscope, automated

A manual urinalysis test with automated microscopic examination is a lab process that checks your urine for health indicators. It involves a machine scanning your sample to identify any abnormal elements, which can assist in diagnosing various conditions.

This service was performed 699 times for 413 patients

Measurement c-reactive protein for detection of infection or inflammation

C-reactive protein (CRP) test is a blood test that checks for signs of inflammation or infection in the body. High levels of CRP often suggest that there's inflammation or a bacterial infection. This test helps in monitoring and managing conditions like arthritis and heart disease.

This service was performed 72 times for 43 patients

Natriuretic peptide (heart and blood vessel protein) level

A natriuretic peptide level test is a blood test that helps doctors check for heart failure. It measures the amount of certain proteins that your heart and blood vessels produce when they are under stress. High levels may indicate heart disease.

This service was performed 87 times for 57 patients

Parathormone (parathyroid hormone) level

The Parathormone level test measures the amount of parathyroid hormone in your blood. This hormone controls calcium and phosphorus levels in the body, which are vital for bone health. Abnormal levels may indicate issues like kidney disease or parathyroid gland disorders.

This service was performed 73 times for 46 patients

Phenytoin level, total

A Phenytoin level, total test measures the amount of phenytoin, an anti-seizure medication, in your blood. It's used to ensure the drug is at a therapeutic level, helping control seizures without causing side effects. Regular monitoring is often required.

This service was performed 31 times for 13 patients

Phosphate level

A phosphate level test measures the amount of phosphate in your blood. Phosphate is a chemical that contains the mineral phosphorus, crucial for energy production, muscle and nerve function, and bone growth. Imbalances may indicate kidney disease or other health issues.

This service was performed 81 times for 43 patients

Prealbumin (protein) level

A Prealbumin (protein) level test measures the amount of prealbumin in your blood. Prealbumin is a protein made by your liver and helps carry vitamins and hormones through your body. Low levels could indicate malnutrition, liver disease, or other health issues.

This service was performed 15 times for 14 patients

Psa (prostate specific antigen) measurement, total

PSA measurement is a simple blood test that checks for a specific protein produced by your body. High levels could indicate a health issue that needs further investigation. It's often used to monitor general wellness and is part of routine health screening.

This service was performed 62 times for 59 patients

Red blood cell sedimentation rate, to detect inflammation, automated

The Red Blood Cell Sedimentation Rate is a test that helps detect inflammation in the body. It's automated, meaning a machine does the work. This test measures how fast red blood cells settle at the bottom of a tube in an hour. A faster rate may indicate inflammation.

This service was performed 122 times for 82 patients

Special gram or giemsa stain for microorganism

A special Gram or Giemsa stain is a laboratory technique used to identify microorganisms in a sample. This stain highlights the microorganisms, making them easier to see under a microscope. It's a crucial step in diagnosing various infections and diseases.

This service was performed 33 times for 21 patients

Thyroid hormone evaluation

A thyroid hormone evaluation is a test that measures the levels of thyroid hormones in your body. These hormones regulate energy and metabolism. If they're too high or too low, it could indicate a thyroid disorder. This test helps in diagnosing and managing such conditions.

This service was performed 291 times for 245 patients

Thyroxine (thyroid chemical), total

A Thyroxine (thyroid chemical) total test measures the amount of thyroxine, a hormone produced by your thyroid gland, in your blood. This hormone helps regulate your body's metabolism. The test can help diagnose thyroid disorders, such as hypothyroidism or hyperthyroidism.

This service was performed 74 times for 64 patients

Total protein level, urine

The Total Protein Level in urine test measures the amount of protein present in your urine. This helps to check kidney health as high levels may indicate a problem. It's a simple, non-invasive procedure involving a urine sample.

This service was performed 83 times for 55 patients

Travel allowance one way in connection with medically necessary laboratory specimen collection drawn from home bound or nursing home bound patient; prorated miles actually travelled

This service covers travel costs for healthcare professionals to collect necessary lab specimens from patients who are homebound or in nursing homes. The allowance is calculated based on the actual miles traveled to perform this service.

This service was performed 17,004 times for 146 patients

Travel allowance one way in connection with medically necessary laboratory specimen collection drawn from home bound or nursing home bound patient; prorated miles actually travelled

This service covers travel costs for healthcare professionals to collect necessary lab specimens from patients who are homebound or in nursing homes. The allowance is calculated based on the actual miles traveled to perform this service.

This service was performed 42,135 times for 967 patients

Uric acid level, blood

A blood uric acid level test measures the amount of uric acid in your blood. Uric acid is a waste product that your body produces when it breaks down purines, substances found in your body and in certain foods. High levels may lead to gout or kidney stones.

This service was performed 54 times for 41 patients

Urine microalbumin (protein) level

The urine microalbumin level test measures the amount of a protein called albumin in your urine. This test helps to detect early signs of kidney damage. High levels of albumin may suggest your kidneys aren't functioning properly. It's a simple, non-invasive test that involves providing a urine sample.

This service was performed 107 times for 82 patients

Vancomycin (antibiotic) level

A Vancomycin level is a blood test done to measure the amount of Vancomycin, an antibiotic, in your body. This helps to ensure the dosage is effective in fighting infection, but not so high as to cause side effects.

This service was performed 44 times for 17 patients

Vitamin d-3 level

A Vitamin D-3 level test measures the amount of Vitamin D-3, a crucial nutrient, in your body. This test helps identify if your levels are too low or too high. Low levels may lead to bone weakness, while high levels could harm your kidneys. It's a simple blood test.

This service was performed 438 times for 346 patients

CLIA Information

The Clinical Laboratory Improvement Amendments (CLIA) of 1988 applies to facilities or sites that test human specimens for health assessment or to diagnose, prevent, or treat disease. The CLIA Program sets standards for clinical laboratory testing and issues certificates. The NPI / CLIA crosswalk information for this NPI number is:

CLIA Number

45D2005805

Facility Type

Independent

Certificate Effective Date

July 25, 2024

Certificate Expiration Date

July 24, 2026

Laboratory Director

ALEJANDRO LONGORIA

Certificate Type

Certificate of Accreditation

Certificate Type Description

This is a CLIA certificate is issued to Advance Medical Lab on the basis of the laboratory's accreditation by an accreditation organization approved by CMS. This type of certificate is issued to a laboratories tha perform nonwaived (moderate and/or high complexity) testing.

Reviews for ADVANCE MEDICAL LAB

There are currently no reviews for this provider. Be the first person to share your experience with this provider by filling out our review form. Your insights are appreciated and will help others make informed decisions.

Frequently Asked Questions